. Cnam-ts,

, Caisse Nationale D'assurance Maladie des Travailleurs Salariés, 2017.

Y. Roquelaure, C. Ha, A. Leclerc, A. Touranchet, M. Sauteron et al., Epidemiologic surveillance of upper-extremity musculoskeletal disorders in the working population, Arthritis Care Res, vol.55, pp.765-778, 2006.
URL : https://hal.archives-ouvertes.fr/inserm-00108758

G. M. Hägg, Corporate initiatives in ergonomics-An introduction, Appl. Ergon, vol.34, pp.3-15, 2003.

W. P. Neumann and J. Village, Ergonomics action research II: A framework for integrating HF into work system design, Ergonomics, vol.55, pp.1140-1156, 2012.

M. Zare, J. Sagot, and Y. Roquelaure, Within and between Individual Variability of Exposure to Work-Related Musculoskeletal Disorder Risk Factors, Int. J. Environ. Res. Public. Health, vol.15, 1003.
URL : https://hal.archives-ouvertes.fr/hal-01863046

E. Takala, I. Pehkonen, M. Forsman, G. A. Hansson, S. E. Mathiassen et al., Systematic evaluation of observational methods assessing biomechanical exposures at work, Scand. J. Work. Environ. Health, vol.2010, pp.3-24

A. Falck, R. Örtengren, and D. Högberg, The impact of poor assembly ergonomics on product quality: A cost-benefit analysis in car manufacturing, Hum. Factors Ergon. Manuf. Serv. Ind, vol.20, pp.24-41, 2010.

A. Malaisé, P. Maurice, F. Colas, F. Charpillet, and S. Ivaldi, Activity Recognition with Multiple Wearable Sensors for Industrial Applications, Proceedings of the Advances in Computer-Human Interactions, pp.25-29, 2018.

M. Murray, B. Lange, S. S. Chreiteh, H. B. Olsen, B. R. Nørnberg et al., Neck and shoulder muscle activity and posture among helicopter pilots and crew-members during military helicopter flight, J. Electromyogr. Kinesiol, vol.27, pp.10-17, 2016.

M. C. Schall, N. B. Fethke, and H. Chen, Working postures and physical activity among registered nurses, Appl. Ergon, vol.54, pp.243-250, 2016.

C. Nordander, G. A. Hansson, K. Ohlsson, I. Arvidsson, I. Balogh et al., Exposure-response relationships for work-related neck and shoulder musculoskeletal disorders-Analyses of pooled uniform data sets, Appl. Ergon, vol.55, pp.70-84, 2016.

R. F. Granzow, M. C. Schall, M. F. Smidt, H. Chen, N. B. Fethke et al., Characterizing exposure to physical risk factors among reforestation hand planters in the Southeastern United States, Appl. Ergon, vol.66, pp.1-8, 2018.

A. J. Mcclellan, W. J. Albert, S. L. Fischer, F. A. Seaman, and J. P. Callaghan, Shoulder loading while performing automotive parts assembly tasks: A field study, Occup. Ergon, vol.8, pp.81-90, 2009.

L. Punnett, L. J. Fine, W. M. Keyserling, G. D. Herrin, and D. B. Chaffin, Shoulder disorders and postural stress in automobile assembly work, Scand. J. Work. Environ. Health, vol.26, pp.283-291, 2000.

C. Nordander, K. Ohlsson, I. Åkesson, I. Arvidsson, I. Balogh et al., Exposure-response relationships in work-related musculoskeletal disorders in elbows and hands-A synthesis of group-level data on exposure and response obtained using uniform methods of data collection, Appl. Ergon, vol.44, pp.241-253, 2013.

A. Liljedahl and A. Muftic, Managing Production Deviations: A Case Study at Scania AB; Master of Science-Production Engineering and Management, 2012.

G. A. Hansson, I. Balogh, J. U. Byström, K. Ohlsson, C. Nordander et al., Questionnarie versus direct technical measurements in assessing postures and movements of the head, upper back, arms and hands, Scand. J. Work. Environ. Health, vol.27, pp.30-40, 2001.

K. Kazmierczak, S. E. Mathiassen, M. Forsman, and J. Winkel, An integrated analysis of ergonomics and time consumption in Swedish 'craft-type' car disassembly, Appl. Ergon, vol.36, pp.263-273, 2005.

M. Zare, S. Biau, R. Brunet, A. Gourlay, and Y. Roquelaure, A comparison of neck bending and flexion measurement methods for assessment of ergonomic risk, Int. J. Occup. Saf. Ergon, vol.21, pp.330-335, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01392369

E. Bernmark and C. Wiktorin, A triaxial accelerometer for measuring arm movements, Appl. Ergon, vol.33, pp.541-547, 2002.

M. Zare, A. Malinge-oudenot, R. Höglund, S. Biau, and Y. Roquelaure, Evaluation of ergonomic physical risk factors in a truck manufacturing plant: Case study in SCANIA Production Angers, Ind. Health, vol.54, pp.163-176, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01392339

B. D. Lowe, Accuracy and validity of observational estimates of shoulder and elbow posture, Appl. Ergon, vol.35, pp.159-171, 2004.

B. D. Lowe, Accuracy and validity of observational estimates of wrist and forearm posture, Ergonomics, vol.47, pp.527-554, 2004.

B. D. Lowe and E. F. Krieg, Relationships between observational estimates and physical measurements of upper limb activity, Ergonomics, vol.52, pp.569-583, 2009.

B. D. Lowe, P. Weir, and D. Andrews, Observation-Based Posture Assessment: Review of Current Practice and Recommendations for Improvement; Department of Health and Human Services, Centers for Disease Control and Prevention, 2014.

, International Organization for Standardization (ISO)

C. Ha and Y. Roquelaure, Réseau Expérimental de Surveillance Epidémiologique des Troubles Musculo-Squelettiques Dans les Pays de la Loire, Protocole de la Surveillance dans les Entreprises, 2002.

. Invs, , 2007.

G. Å. Hansson, I. Balogh, K. Ohlsson, L. Granqvist, C. Nordander et al., Physical workload in various types of work: Part II. Neck, shoulder and upper arm, Int. J. Ind. Ergon, vol.40, pp.267-281, 2010.

I. Balogh, P. Ørbaek, K. Ohlsson, C. Nordander, J. Unge et al., Malmö Shoulder/Neck Study Group. Self-assessed and directly measured occupational physical activities-Influence of musculoskeletal complaints, age and gender, Appl. Ergon, vol.35, pp.49-56, 2004.

G. Å. Hansson, I. Arvidsson, K. Ohlsson, C. Nordander, S. E. Mathiassen et al., Precision of measurements of physical workload during standardised manual handling. Part II: Inclinometry of head, upper back, neck and upper arms, J. Electromyogr. Kinesiol, vol.16, pp.125-136, 2006.

A. Burdorf and J. Laan, Comparison of methods for the assessment of postural load on the back, Scand. J. Work Environ. Health, pp.425-429, 1991.

M. T. Driessen, K. I. Proper, M. W. Van-tulder, J. R. Anema, P. M. Bongers et al., The effectiveness of physical and organisational ergonomic interventions on low back pain and neck pain: A systematic review, Occup. Environ. Med, vol.67, pp.277-285, 2010.

E. K. Wai, D. M. Roffey, P. Bishop, B. K. Kwon, and S. Dagenais, Causal assessment of occupational lifting and low back pain: Results of a systematic review, Spine J, vol.10, pp.554-566, 2010.

B. K. Kwon, D. M. Roffey, P. B. Bishop, S. Dagenais, and E. K. Wai, Systematic review: Occupational physical activity and low back pain, Occup. Med, vol.61, pp.541-548, 2011.

I. Balogh, K. Ohlsson, C. Nordander, S. Skerfving, and G. A. Hansson, Precision of measurements of physical workload during standardized manual handling part III: Goniometry of the wrists, J. Electromyogr. Kinesiol, vol.19, pp.1005-1012, 2009.

G. A. Hansson, I. Balogh, K. Ohlsson, L. Granqvist, C. Nordander et al., Physical workload in various types of work: Part I. Wrist and forearm, Int. J. Ind. Ergon, vol.39, pp.221-233, 2009.

I. Arvidsson, I. Balogh, G. A. Hansson, K. Ohlsson, I. Åkesson et al., Rationalization in meat cutting-Consequences on physical workload, Licensee MDPI, vol.43, pp.1026-1032, 2012.